WELCOME TO SARATHI
~DESIGNERS FOR SPRING HANGERS & SUPPORTS SINCE 1972~

THE FOUNDER:


Mr. S.V. Parthasarathi Rao B.E. {Hons.} started this company in 1972, He is a Gold Medallist in Mech. Engg. from Andhra University, AP, INDIA. He had vast experience working as a Chief Design Engineer at P& D Division of PDIL ( Projects and Development India Ltd., which is formerly M/s. Fertilizers Corporation of India Ltd.) Sindri as. Chief Engineer he nursed a vision to pioneer the manufacture of quality Spring Hangers & Supports in our country, which was being
imported till then, and required in INDIA on regular basis in the Fertilizer Plants, Refineries, Petrochemical Plants, Thermal Power Plants, Nuclear Power Stations etc.This vision became a reality with the setting up of the country's first factory i.e. "SARATHI ENGINEERING ENTERPRISES ". for the manufacture of Spring Supports and hangers at Hyderabad, AP, INDIA, 500 039. And so Hyderabad is connected to all the important cities in India by Air, Rail & Road etc. To manufacture Spring Hangers, the main component is quality Springs only. Hence manufacture of helical coil springs from wire dia. 5 mm. to 80 mm. was also been taken up in the same premises to maintain good quality springs as per international and national standards. Today with over 34 years of experience, "SARATHI" got its brand name acknowledged by all leading consultants & MNC in south Asia, And "SARATHI" solidly established its position in the manufacture and supply of quality springs up to 80mm. wire dia. and Variable Spring Hangers from 11 kegs. To 42500 KGs. Loads and 0 mm. to 180 mm. travel { 75 sizes} and Constant Spring Hangers & Supports from 9.5 kg. to 30,000 kegs. Load range and travels up to 700 mm. We have supplied to all thermal nuclear power stations, oil refineries, fertilizer plants & petrochemical complexes etc. Through out the country and also exporting to other countries. "SARATHI" CAN SUPPLY Helical Coil Springs or Spring Hangers, Rigid Hangers and Supports and Accessories to any spec. As required by the Customers requirements of following standards given below:-
  • U.S. Manufacture's Standardization Society MSS-SP-58 , 69,
  • The ANSI code for Power Piping - ANSI B31.1
  • The ANSI code for Petroleum Refinery Piping : B31.3 and others
Our DIRECTOR Mr. S.V. SUDHEER who is the only son of our Managing Director Mr.S.V. PARTHASARATHI RAO motivates us with new reforms in our company , second in command in our organization .and the best who implemented the following:
  1. Universal testing M/c. For locking the springs at the given Cold/Hot loads with the aid of calibration load cells. (In the beginning, the locking was done manually by putting counter weights).
  1. By changing the locking device into universal locking system with full threaded studs. (Earlier locking was done by pins at that particular set load}. Now there is a provision of locking at any load in its range, which was made easy to change the locking position in the last minute.
  2. Shot Blasting facility was introduced for proper cleaning of all the parts.
  3. End forging of Spring Steel material was done manually , now we procured forging hammer to make the job fast and to save time.
  4. Automatic coiling machine was designed to increase the production & save time.Initially the springs were coiled manually , afterwards we made the same Semi automatic. Now the complete process was fully automatic with “Automatic Coiling Machine” which was designed, and Fabricated by us with the facility of automatic pitch adjustment.
  5. Chemical & Mechanical testing facility was improved by computerization.
  6. Storage facility of Raw materials, end products, scrap yards etc. introduced.
  7. Internal stage wise latest quality procedures were implemented.
  8. Erection of foot mounted spring supports were made easy by introducing thrust bearings which saved lot of man power and time.
  9. To increase the production , the following machinery was procured.
    1. Thread Rolling Machine.
    2. Horizontal boring M/c.
    3. Radial drilling machine.
    4. Bar peeling M/c., Straightening M/c. And Centreless grinding M/c.
    5. Magnetic particle test M/c. For crack detection.
    6. 125 KV and 250 KV generators.
    7. 100 M.T. Hydraulic press.
OUR GOAL:
There are miles to go to fulfill the ambition of not only exporting to all the counties in the world, but also expanding the manufacturing facilities covering all accessories and equipment needed for pipe lines, pipe erection equipment , achieving and maintaining a leading position as a supplier of quality products to international standards and to build a high level of customer confidence by providing increased value for customer's money by means of latest technology, machinery and best quality and best timely deliveries and dispatches of our products.

WRITE TO SARATHI FOR ALL YOUR
SPRING, SPRING HANGERS & SUPPORTS REQUIREMENTS!

SARATHI ENGINEERING ENTERPRISES PVT. LTD.
Regd. Office & Works: B-10, I.D.A., Uppal, Hyderabad - 500 039. INDIA.
Tel: 2720-1629 / 5397 / 0426; Fax: 040-2720-9494 / 1711
E-mail: seepl@yahoo.com, seeplnd@yahoo.co.in, sarathihangers@gmail.com

SARATHI HOMESARATHI PRODUCTSFEED BACKMULTI BALL BEARINGSSARATHI DISPATCH & NEWS
SARATHI & HELLERJOB VACANCIESPHOTO GALLARYSARATHI AND US
Copiryght © SARATHI ENGINEERING ENTERPRISES PVT. LTD. 2006. All rights reserved.